Rigs & Cages

Items 1 to 10 of 33 total

List Grid

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  1. Atlas Group Training System

    Atlas Group Training System
    ShareThis

    Condition: New

    Call for pricing
    The Atlas Group Training System can enhance your facility’s current small group training or help you launch a new dynamic program for increased revenue.
  2. The Zone Functional Training XFT 500

    The Zone Functional Training XFT 500
    ShareThis

    Condition: New

    Call for pricing
    For facilities looking to maximize training and storage!
  3. THE TRX® TRAINING ZONE

    THE TRX® TRAINING ZONE
    ShareThis

    Condition: New

    Call for pricing
    At Aktiv, we amplify dynamic training areas for health clubs and specialty studios alike. Our mission is to establish safe, functional, and revenue-generating spaces, while our clients deliver inspirational exercise experiences. Integrating the principles of functional fitness with the technical expertise of functional design is our calling. We craft energizing and balanced operational solutions to accommodate today’s explosive dynamic training trends. Aktiv is the United States design & distribution partner for GYM RAX™, Fitgraphix™ and LYFT™ Fitness.
  4. TKO Power Rack

    TKO Power Rack
    ShareThis

    Condition: New

    Call for pricing
    • 3"x3" 11 Gauge steel 
    • Upper and lower band pegs 
    • Laser cut numbering system 
    • Polyurethane J- Cups and Safety arms to prevent bar damage 
    • 2 Olympic bar holders 4 weight plate pegs, can hold bumper plates on each 
    • Oversized footing for added stability 
    • Textured paint on uprights for increased wear prevention
  5. TKO Half Rack

    TKO Half Rack
    ShareThis

    Condition: New

    Call for pricing
    • 3x3 Steel uprights 
    • Laser cut numbering system 
    • Polyurethane on J-Cups and Safety Arms to prevent 
    • Bar damage 3 lower band pegs 
    • 2 Olympic bar holders
  6. C-100 Half Power Rack

    C-100 Half Power Rack
    ShareThis

    Condition: New

    Call for pricing
    The Wright Equipment C Series is a modular rack that uses the tried and proven pin and twist method for it's accessories. We also use our Laser cutting technology to cut the uprights for the C Series Racks. This is a simple Rack and therefore very cost effective for you the customer. We use UHMW plastic slides everywhere possible to avoid metal on metal contact to help extend the life of the powder coating. We also add standard the plastic weight peg storage sleeves. This will keep you from scratching up those pegs and keep them looking good and black for the life of the rack. We have no pull pins on this rack. There are also many options for this rack. You can add band pegs, extra bar storage, dip attachments, landlines, even custom logos. You can add a platform with this rack if desired. 8' wide and 6' deep with option of insert in the C-100 rack as well. SPECS Brand : Wright Equipment Use : Squat/Bench/PullUp/Power Lifting Weight : 435lbs Upright : 11ga 3"x3" tube Material : Steel Coating : Custom Powder Height : 105" Width : Base 48" / 56" Including Weight Storage Length : 60" Assembly : Bolt Warranty : Lifetime* Welds/Structure Made in USA: Yes Options : Platform, Dip Station, Landmine
  7. C-200 Double Half Rack

    C-200 Double Half Rack
    ShareThis

    Condition: New

    Call for pricing
    The Wright Equipment C Series is a modular rack that uses the tried and proven pin and twist method for it's accessories. We also use our Laser cutting technology to cut the uprights for the C Series Racks. This is a simple Rack and therefore very cost effective for you the customer. We use UHMW plastic slides everywhere possible to avoid metal on metal contact to help extend the life of the powder coating. We also add standard the plastic weight peg storage sleeves. This will keep you from scratching up those pegs and keep them looking good and black for the life of the rack. We have no pull pins on this rack. There are also many options for this rack. You can add band pegs, extra bar storage, dip attachments, landlines, even custom logos. You can add a platform with this rack if desired. 8' wide and 6' or 4' deep. SPECS Brand : Wright Equipment Use : Squat/Bench/PullUp/Power Lifting Weight : 750lbs Upright : 11ga 3"x3" tube Material : Steel Coating : Custom Powder Height : 105" Width : Base 48" / 56" Including Weight Storage Length : 96" Assembly : Bolt Warranty : Lifetime* Welds/Structure Made in USA: Yes Options : Platform, Dip Station, Landmine
  8. C-300 Cage Rack

    C-300 Cage Rack
    ShareThis

    Condition: New

    Call for pricing
    The C-300 is in a class of it's own. 11gauge 3"x3" uprights with laser adjustment holes cut into all four sides of the uprights. Also in all of the uprights are laser cut numbers that will give your athletes an easy visual to allow for quick adjustments from lift to lift. The standard Shackle and Strap gives you many options as well. A safer way to do your bench lifts or squats while relying on a 20 ton tested Strap. This Rack has a number of attachments available and also has the ability to easily be attached to a wall or Functional training stations throughout your weight room. SPEC Brand : Wright Equipment Use : Squat/Bench/PullUp/Power Lifting Weight : 635lbs Upright : 11ga 3"x3" Material : Steel Overlay : NO Coating : Custom Powder Height : 96" Width : Base 48" / 56" Including Weight Storage Length : 72" Assembly : Bolt Warranty : Lifetime* Welds/Structure Made in USA: Yes Options : Platform, Dip Station, Landmine
  9. TD-100 Half Power Rack

    TD-100 Half Power Rack
    ShareThis

    Condition: New

    Call for pricing
    The TD Half Rack At 435lbs, this rack is weighted properly that it can be a free standing Rack in your weight room. The Rack can be attached to the floor or can bridge together with other racks to increase stability. The TD Rack uprights are produced on precision tube laser machines and can be custom colored to your choosing. Options The TD rack comes with a number of options including, dip, jerk treys, 1 leg squat, GHD attachment, band pegs, soft safety straps, outside safety arms, land mine, can be bridged, cannon ball grip, laser cut logo banner, and also platform SPEC Brand: Wright Equipment Use: Squat/Bench/PullUp Rack Weight: 435 lbs Front Upright Material 7ga 3" x 3" Upright Style: Laser Tear Drop Overlay: No Overlay Material: Steel Coating: Customizable Coating Type: Powder Height: 104" Width: Base 48" 56" Including Weight Storage Length: 60" Assembly: Bolt Guarantee/Warranty: Lifetime* Made in the USA: Yes Options : Platform, Dip Station, Landmine
  10. Wright TD-200 Double Half Rack

    Wright TD-200 Double Half Rack
    ShareThis

    Condition: New

    Call for pricing
    Brand: Wright Equipment Use: Squat/Bench/PullUp Rack Weight: 750 lbs Front Upright Material 7ga 3" x 3" Upright Style: Laser Tear Drop Overlay: No Overlay Material: Steel Coating: Customizable Coating Type: Powder Height: 104" Width: Base 48" 56" Including Weight Storage Length: 108" Assembly: Bolt Guarantee/Warranty: Lifetime* Made in the USA: Yes Options : Platform, Dip Station, Landmine

Items 1 to 10 of 33 total

List Grid

Page:
  1. 1
  2. 2
  3. 3
  4. 4
eNews
Receive deals, updates, industry trends, and more.
Thank you for your submission.

Please enter a valid Email.

Precor
Inspire
BH
WaterRower
True
StairMaster